To Next PageTo Next PageWhy Daikin Air Conditioner does not operate?
If your Daikin Air Conditioner is not operating and the OPERATION lamp is off, check the following: 1. Ensure that a breaker hasn't been turned OFF or a fuse hasn't blown. 2. Check for any power failures. 3. Verify that batteries are correctly installed in the remote controller. 4. Make sure the timer setting is correct.
What to do if Daikin FTXS20D(A)VMW(L) Air Conditioner power cord is abnormally hot or damaged?
If the power cord of your Daikin Air Conditioner is abnormally hot or damaged, turn the breaker OFF and call the service shop.
Why Daikin Air Conditioner operation stops suddenly and OPERATION lamp is on?
If your Daikin Air Conditioner operation stops suddenly while the OPERATION lamp is on, it will automatically resume operation in about 3 minutes.
General| Model | FTXS20D(A)VMW(L) |
|---|---|
| Category | Air Conditioner |
| Type | Wall Mounted |
| Cooling Capacity | 2.0 kW |
| Heating Capacity | 2.5 kW |
| Outdoor Unit Dimensions (HxWxD) | 550x765x285 mm |
| Refrigerant | R32 |
| Seasonal Coefficient of Performance (Heating) | 4.00 |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Noise Level (Min) | 19 dBA |
Details the components and labels of the indoor air conditioning unit.
Details the components and labels of the outdoor air conditioning unit.
Instructions on how to correctly insert batteries into the remote control.
Guidance on aiming the remote, communication distance, and handling.
Instructions for setting the timer to turn the unit off automatically.
Instructions for setting the timer to turn the unit on automatically.
Guidance on setting both ON and OFF timers simultaneously for convenience.
Guidelines for setting operation modes when multiple indoor units are connected.
Information on the NIGHT QUIET mode for cooling operations in multi systems.
How to use OUTDOOR UNIT QUIET operation with multi-system installations.
Enabling mode lock for heat pump models in multi-system setups.
Defines room priority for mode selection, powerful operation, and quiet operation in multi-systems.
Instructions for cleaning the indoor unit, outdoor unit, and remote controller.
Detailed steps for opening, cleaning, and reattaching the front panel.
Instructions for washing and cleaning the main air filters.
Guidance on cleaning, maintaining, and replacing the photocatalytic filter.
How to access and interpret fault codes displayed on the remote controller.
