SiENBE12-713 Instruction
System Configuration 131
2.1.6 Adjusting the air flow direction
FTK(X)S 20/25/35/50 D
You can adjust the air flow direction to increase your comfort.
"
To adjust the horizontal blades (flaps)
1. Press “SWING button”.
The display on the LCD and the flaps
will begin to swing.
2. When the flaps have reached the desired
position, press “SWING button” once
more.
The flaps will stop moving.
disappears from the LCD.
"
To adjust the vertical blades (louvers)
Hold the knob and move the louvers.
(You will find a knob on the left-side and the right-side blades.)
• When the unit is installed in the corner of a room, the
direction of the louvers should be facing away from the
wall. If they face the wall, the wall will block off the wind,
causing the cooling (or heating) efficiency to drop.
TEMP
ON/OFF
POWERFUL
MODE
FA N
SWING
QUIET
SENSOR
ECONO
COMFORT
TIMER
ON
CANCEL
OFF
1, 2
3, 4
To Next Page
Loading...
