SiENBE12-713 Instruction
System Configuration 149
“INTELLIGENT EYE” is useful for Energy Saving
Notes on “INTELLIGENT EYE”
CAUTION
"
To adjust the angle of the INTELLIGENT
EYE SENSOR
• You can adjust the angle of the
INTELLIGENT EYE sensor to increase
the detection area. (Adjustable angle: 15°
to right an left of centre)
• Gently push and slide the sensor to adjust
the angle.
• After adjusting the angle, wipe the sensor
gently with a clean cloth, being careful not
to scratch te sensor.
"
Energy saving operation
• Change the temperature –2°C in heating / +2°C in cooling / +2°C in dry mode from set temperature.
• Decrease the air flow rate slightly in fan operation. (In FAN mode only)
• Application range is as follows.
• Sensor may not detect moving objects further than 5m away. (Check the application range)
• Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.
• The sensor also mistakenly detects pets, sunlight, fluttering curtains and light reflected off of mirrors as passersby.
• INTELLIGENT EYE operation will not go on during powerful operation.
• Night set mode will not go on while you use INTELLIGENT EYE operation.
• Do not place large objects near the sensor. Also keep heating units or humidifiers outside the sensor’s detection area.
This sensor can detect objects it shouldn’t as well as not detect objects it should.
• Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
INTELLIGENT EYE
sensor
Moving the sensor to the left Moving the sensor to the right
To Next Page
Loading...
