Why my Daikin Air conditioning operation does not start soon?
- Ssherri28Aug 27, 2025
You should wait for about 3 minutes.

Why my Daikin Air conditioning operation does not start soon?
You should wait for about 3 minutes.
What to do if water leaks from the indoor unit of Daikin Air conditioning?
If water leaks from the indoor unit, turn the breaker OFF and call the service shop.
What to do if Daikin Air conditioning operation stops suddenly and the OPERATION lamp flashes?
If the Daikin air conditioning stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstacles. Then, turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller.
| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 9 kg |
| Type | Split |
Details features and functions available for Daikin indoor units in cooling-only configurations.
Lists functions and features specific to Daikin indoor units designed for heat pump operation.
Provides detailed technical specifications for various cooling-only indoor unit types, including airflow, power, and dimensions.
Details technical specifications for outdoor units used in cooling-only systems, covering capacity, refrigerant, and connections.
Presents technical specifications for indoor units in heat pump configurations, covering operational parameters and physical attributes.
Lists technical specifications for outdoor units in heat pump systems, including capacity, refrigerant, and operational data.
Provides critical safety guidelines for installation, operation, and general handling of the air conditioner to prevent hazards.
Provides troubleshooting steps for issues related to indoor units, including PCB abnormalities and thermistor errors.
Outlines troubleshooting procedures for common problems detected in outdoor units, referencing LED indications and specific faults.











