Daikin FTXS25K2V1B - Airflow Direction Control; Auto Swing Operation; Setting Flap and Louver Positions

13
Adjusting the Airfl ow Direction
and Rate
Youcanadjusttheairowdirectiontoincreaseyourcomfort.
■
To start auto swing
Upper and lower airfl ow direction
Press .
•“ ”isdisplayedontheLCD.
•Theap(horizontalblade)willbegintoswing.
■
To set the fl ap at desired position
•Thisfunctioniseffectivewhileapisinautoswingmode.
Press when the fl ap has reached the
desired position.
•“ ”disappearsfromtheLCD.
■
To adjust the louvers at desired position
Hold the knob and move the louvers.
•Youwillndaknobontheleft-sideandtheright-side
blades.
•Whentheunitisinstalledinthecornerofaroom,the
directionofthelouvers(verticalblades)shouldbefacing
awayfromthewall.
Iftheyfacethewall,thewallwillblockoffthewind,
causingthecooling(orheating)efciencytodrop.
•Iftheapisintheway,press
ontheremotecontrollertomovetheapoutof
thewayandthenadjustthelouvers.
01_EN_3P297033-1.indd 13 10/12/2011 2:15:09 PM