English
34
1. Take off the titanium
apatite photocatalytic air-
purifying lter.
•Openthefrontpanelandpullouttheairlters.
•Holdtherecessedpartsoftheframeandunhook
the4claws.
Claw
2.
Clean or replace the titanium
apatite photocatalytic air-
purifying lter.
[Maintenance]
2-1 Vacuum dusts, and soak in
lukewarm water or water for about
10 to 15minutes if dirt is heavy.
•Donotremovethelterfromframewhen
washingwithwater.
2-2 After washing, shake off remaining
water and dry in the shade.
•Sincethematerialismadeoutofpolyester,do
notwringoutthelterwhenremovingwaterfrom
it.
[Replacement]
Remove the tabs on the lter
frame and replace with a new
lter.
•Donotthrowawaythelterframe.Reusethe
lterframewhenreplacingthetitaniumapatite
photocatalyticair-purifyinglter.
•Disposeoftheoldlterasnon-ammablewaste.
3. Set the lters as they were
and close the front panel.
•Pressthefrontpanelatbothsidesandthe
center.
NOTE
•Operationwithdirtylters:
– cannotdeodorizetheair,
– cannotcleantheair,
– resultsinpoorheatingorcooling,
– maycauseodour.
•Disposeofoldltersasnon-ammablewaste.
•Toordertitaniumapatitephotocatalyticair-purifying
ltercontacttotheserviceshopthereyouboughtthe
airconditioner.
Item
Titaniumapatitephotocatalytic
air-purifyinglter(withoutframe)1set
PartNo. KAF970A46
■
Titanium apatite photocatalytic air-purifying lter
01_EN_3P297033-1.indd 34 10/12/2011 2:15:34 PM