What to do if my Daikin FTXS50G2V1B has an abnormal functioning during operation?
If an abnormal functioning happens during operation of your Daikin Air Conditioner, turn the breaker OFF, then turn it back ON. After that, try operating the air conditioner with the remote controller.
Why is my Daikin Air Conditioner cooling (heating) effect poor?
If you notice a poor cooling or heating effect from your Daikin Air Conditioner, make sure the air filters are clean. Check to see if anything is blocking the air inlet or outlet of either the indoor or outdoor units. Ensure that the temperature setting is appropriate, and that all windows and doors are closed. Finally, verify that the airflow rate and air direction are set correctly.
What to do if Daikin FTXS50G2V1B Air Conditioner remote controller signals are not displayed?
Replace all the batteries in your Daikin Air Conditioner remote controller with new size AAA alkaline batteries. For details, refer to “To set the batteries” of this manual. If there is a reset button, press it after replacing the batteries.
General| Cooling Capacity | 5.0 kW |
|---|---|
| Heating Capacity | 6.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R32 |
| Type | Split |
| Seasonal Energy Efficiency Ratio (SEER) | 6.10 |
| Power Supply | 220-240 V, 50 Hz |
| Noise Level (Outdoor Unit) | 48 dB(A) |
Outlines general warnings and cautions for safe operation and potential hazards.
Details specific precautions for fire, electric shock, injury, and property damage.
Explains how to select and start different operating modes.
Guides on starting combined Comfort Airflow and Intelligent Eye operations.
Guides on enabling Econo Mode for power saving.
Illustrates examples of setting weekly timer programs for different days.
Step-by-step guide to setting weekly timer operations, including time and temp.
Covers confirming, canceling, and deactivating weekly timer reservations.
Guides on cleaning standard air filters.
Lists critical symptoms requiring immediate professional service.
How to access and interpret fault codes shown on the remote controller.
To Next Page
