EasyManua.ls Logo

Daikin FTXS71KVM User Manual

Daikin FTXS71KVM
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Inverter / Non-Inverter
Wall Mounted Type
5.0/6.0/7.1 kW Class
15000/18000/24000 Btu/h Class
Si041142
Question and Answer IconNeed help?

Do you have a question about the Daikin FTXS71KVM and is the answer not in the manual?

Daikin FTXS71KVM Specifications

General IconGeneral
ModelFTXS71KVM
Cooling Capacity7.1 kW
Heating Capacity8.0 kW
Seasonal Energy Efficiency Ratio (SEER)6.2
Weight (Indoor Unit)12 kg
TypeSplit System
Power Supply220-240 V, 50 Hz
RefrigerantR32
Energy Efficiency Ratio (Heating)4.0
Outdoor Unit Noise Level49 dB(A)

Summary

Removal of Air Filters and Front Panel

Remove Air Filters

Steps to detach and remove the standard air filters from the unit.

Remove Titanium Apatite Photocatalytic Air-Purifying Filters

Procedure to remove the special photocatalytic air purifying filters.

Remove Front Panel

Steps to carefully detach and remove the front panel of the indoor unit.

Removal of Front Grille

Remove Service Cover

Steps to remove the service cover to access internal components.

Remove Front Grille

Procedure to unfasten and remove the main front grille assembly.

Removal of Horizontal and Vertical Blades

Remove Horizontal Blades

Steps to detach and remove the horizontal air direction blades.

Remove Vertical Blades

Procedure to detach and remove the vertical air direction blades.

Removal of Electrical Box, PCBs, and Swing Motors

Remove Electrical Box

Steps to detach and remove the main electrical component housing.

Remove PCBs

Procedure to remove printed circuit boards from the electrical box.

Remove Swing Motor (Horizontal Blades)

Steps to detach and remove the swing motor for horizontal louvers.

Remove Swing Motor (Vertical Blades)

Steps to detach and remove the swing motor for vertical louvers.

Removal of Indoor Heat Exchanger

Disconnect Refrigerant Piping

Safety procedure for disconnecting refrigerant lines before heat exchanger removal.

Remove Indoor Unit

Steps to detach the indoor unit from its wall mounting plate.

Remove Indoor Heat Exchanger

Procedure to physically remove the indoor heat exchanger component.

Removal of Fan Motor and Fan Rotor

Remove Right Side Plate

Steps to remove the right side access panel.

Remove Fan Motor and Rotor

Procedure to detach and remove the fan motor and rotor assembly.

Remove Left Side Plate

Steps to remove the left side access panel.

Related product manuals