What to do if Daikin Air Conditioner does not operate and OPERATION lamp is off?
If your Daikin Air Conditioner isn't working and the OPERATION lamp is off, check a few things: first, see if a breaker has tripped or a fuse has blown. Next, verify whether there's a power failure in your area. Also, make sure that batteries are correctly installed in the remote controller, and confirm that the timer setting is accurate.
What to do if Daikin Air Conditioner operation stops suddenly and OPERATION lamp flashes?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is flashing, check if the air filters are clean and whether anything is blocking the air inlet or outlet of the indoor and outdoor units. Clean the air filters or remove any obstacles, then turn the breaker OFF. Also, ensure that the operation modes are the same for all indoor units connected to the outdoor units in the multi system.
Why Daikin FTXS71GVMA Air Conditioner operation does not start soon?
If your Daikin Air Conditioner doesn't start immediately, please wait for about 3 minutes.
Why hot air does not flow out soon after the start of heating operation of Daikin FTXS71GVMA?
If hot air does not flow out immediately after starting the heating operation of your Daikin Air Conditioner, allow 1 to 4 minutes for the hot air to begin flowing.
Why mist comes out of the indoor unit of Daikin FTXS71GVMA?
Mist may come out of the indoor unit of your Daikin Air Conditioner when the air in the room is cooled into mist by the cold airflow during cooling operation.
What to do if Daikin Air Conditioner operation stopped suddenly and OPERATION lamp is on?
If your Daikin Air Conditioner operation stopped suddenly but the OPERATION lamp is still on, it should automatically resume operation in about 3 minutes.
What to do if abnormal functioning happens during Daikin FTXS71GVMA operation?
If you experience abnormal functioning during the operation of your Daikin Air Conditioner, try turning the breaker OFF, then turn it back ON, and attempt to operate the air conditioner using the remote controller.
Why the outdoor fan rotates while Daikin Air Conditioner is not in operation?
If the outdoor fan of your Daikin Air Conditioner is rotating even when the unit is not in operation, it could be for system protection when the outdoor temperature is very high.
Why the heating operation stops suddenly and a flowing sound is heard in Daikin FTXS71GVMA?
If the heating operation of your Daikin Air Conditioner stops suddenly and you hear a flowing sound, please wait for about 4 to 12 minutes.
General| Brand | Daikin |
|---|---|
| Model | FTXS71GVMA |
| Category | Air Conditioner |
| Language | English |
Important warnings and cautions for safe operation and installation.
Guidelines for choosing a suitable installation location.
Advice on minimizing noise nuisance to neighbors.
Specifications for dedicated power circuits.
Information on professional relocation services.
Identification and description of indoor unit parts.
Instructions for inserting AAA batteries into the remote.
Guidelines on battery type, replacement, and lifespan.
How to use the remote controller and its communication range.
Steps for mounting the remote control holder on a wall.
How to set the current time on the remote controller.
Procedure for turning on the air conditioner via the breaker.
Steps to select and start an operation mode like AUTO, COOL, HEAT.
Procedure to turn off the air conditioner.
How to adjust the temperature for different modes.
How to adjust the fan speed settings for optimal comfort.
How to control the horizontal air direction using the flap.
How to control the vertical air direction using louvers.
How to enable and disable the 3D airflow feature.
How to activate the quick cooling/heating function for maximum capacity.
How to stop the powerful operation mode.
How to reduce outdoor unit noise for nighttime operation.
How to stop the outdoor unit quiet mode.
How to record and activate preferred temperature and airflow settings.
How to deactivate the home leave function.
How to set temperature and airflow for home leave recording.
How to activate the human movement sensor for energy saving.
How to stop the intelligent eye sensor function.
How to set the unit to turn off automatically at a specific time.
How to disable the off timer setting.
How to set the unit to turn on automatically at a specific time.
Setting both timers simultaneously for scheduled operation.
Rules for setting operation modes in multi-unit systems.
How night quiet mode functions in multi-systems.
Using quiet operation with multi-indoor units.
Forcing specific cooling/heating modes in multi-systems.
How the priority room dictates operation mode for other units.
How powerful mode affects priority room capacity distribution.
How quiet mode affects priority room control.
General instructions for wiping indoor and outdoor units with a dry cloth.
Steps for removing and cleaning the front panel of the indoor unit.
How to wash or vacuum clean the air filters.
Maintenance and replacement guidelines for the purifying filter.
Notes on the impact of dirty filters on performance and odor.
Key points to check on indoor and outdoor units regularly.
Steps to take for storing the unit during extended non-use.
To Next Page
