What to do if LED indicates fan motor fault on Daikin FTXS60GV1B Air Conditioner?
If the LED on your Daikin Air Conditioner indicates a fan motor fault, turn the power off and then on again. If the LED display recurs, the outdoor unit PCB is faulty.
What to do if LED indicates high pressure protector worked or freeze-up in operating unit or stand-by unit in Daikin FTXS60GV1B?
If the LED on your Daikin Air Conditioner indicates a high pressure protector has been activated, or there's freeze-up in the operating or stand-by unit, turn the power off and then on again. If the LED display recurs, the outdoor unit PCB is faulty.
What to do if LED indicates overload relay worked or high discharge pipe temperature in Daikin FTXS60GV1B Air Conditioner?
If the LED on your Daikin Air Conditioner indicates an overload relay has activated or the discharge pipe temperature is high, turn the power off and then on again. If the LED display recurs, the outdoor unit PCB is faulty.
What to do if LED indicates faulty compressor start in Daikin FTXS60GV1B?
If the LED on your Daikin Air Conditioner indicates a faulty compressor start, turn the power off and then on again. If the LED display recurs, the outdoor unit PCB is faulty.
What to do if LED indicates input overcurrent on Daikin FTXS60GV1B?
If the LED on your Daikin Air Conditioner indicates input overcurrent, turn the power off and then on again. If the LED display recurs, the outdoor unit PCB is faulty.
What to do if LED indicates thermistor or CT abnormality on Daikin FTXS60GV1B Air Conditioner?
If the LED on your Daikin Air Conditioner indicates a thermistor or CT abnormality, turn the power off and then on again. If the LED display recurs, the outdoor unit PCB is faulty.
What to do if there is a burning smell from Daikin FTXS60GV1B?
If you notice a burning smell coming from your Daikin Air Conditioner, turn the breaker off and call the service shop.
What to do if the power cord is abnormally hot or damaged on Daikin Air Conditioner?
If you notice the power cord of your Daikin Air Conditioner is abnormally hot or damaged, turn the breaker off and call the service shop.
What to do if LED indicates reversing solenoid valve switching failure on Daikin FTXS60GV1B Air Conditioner?
If the LED on your Daikin Air Conditioner indicates a reversing solenoid valve switching failure, turn the power off and then on again. If the LED display recurs, the outdoor unit PCB is faulty.
What to do if LED indicates refrigerant shortage on Daikin FTXS60GV1B Air Conditioner?
If the LED on your Daikin Air Conditioner indicates a refrigerant shortage, turn the power off and then on again. If the LED display recurs, the outdoor unit PCB is faulty.
Critical safety warnings detailing potential severe injury or loss of life.
Step-by-step guide to setting the OFF timer for automatic shutdown.
Step-by-step guide to setting the ON timer for automatic startup.
Detailed instructions for setting up daily timer programs for the entire week.
Solutions for common issues such as flaps not swinging or sudden heat operation stops.
Troubleshooting steps for when the unit does not operate or the OPERATION lamp flashes.
Advice for remote controller malfunctions and poor cooling or heating effects.
Explains how to display and interpret error codes shown on the remote controller.
General| Brand | Daikin |
|---|---|
| Model | FTXS60GV1B |
| Category | Air Conditioner |
| Language | English |
To Next Page
