Daikin FTXV41UVLT - Page 11

10
 To change the temperature setting
Press
.
•Press toraisethetemperatureandpress tolowerthetemperature.
Eachpressingofthebuttonchangesthetemperatureby1°C.
COOL
operation
HEAT
operation
AUTO
operation
DRY
operation
FAN ONLY operation
18~32°C 10~30°C 18~30°C
“STD~(STD–3°C)”
*1, *2
Thetemperaturesettingcannot
bechanged.
*1STD(Standard)....IndoortemperatureatthetimewhentheDRYoperationisstarted.
*2STD(Standard)....“
”and“ ”appearontheLCD.
[Dry (Dehumidifying)]
 To use Dry
(Dehumidifying) mode
Press
.
•“ ”and“ ”appearontheLCD.
•TheDRYoperationstart.
•Press
toraisethetemperatureandpress tolowerthetemperature1°Ceach
press.
Step 1 Step 2 Step 3
•Thismodemixesdehumidiedcoolairwithroomairtoadjusttheairoutlettemperature
andremovemoisture.
•Whentheindoortemperaturerises,theCOOLINGoperationautomaticallystarts.
•Whentheoutdoortemperatureislowerthantheindoortemperature,dehumidifyingisless
effective.
•Inordertolowerthehumidity,theairowrateduringtheDRYoperationisautomatically
controlled.
English
Basic Operation Basic Operation
01_EN_3P492259-18L.indd 10 12/13/2019 2:08:17 PM