What to do if Daikin Air Conditioner operation stops suddenly and the OPERATION lamp blinks?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is blinking, try the following steps: Clean the air filters or remove any obstacles. Then, turn the breaker OFF, wait a moment, and turn it back ON. Try operating the air conditioner again using the remote controller. If the lamp continues to blink, further assistance is needed.
Why Daikin Air Conditioner does not operate and OPERATION lamp is off?
If your Daikin Air Conditioner isn't operating and the OPERATION lamp is off, check these items: Ensure that a breaker hasn’t been turned OFF or a fuse hasn’t blown. Verify that there isn’t a power failure. Check if batteries are properly installed in the remote controller. Confirm that the timer setting is correct.
What to do if Daikin FTY60GAV1A has burning smell?
If you notice a burning smell coming from your Daikin Air Conditioner, immediately stop operation and turn the breaker OFF.
Why hot air does not flow out soon after starting Daikin Air Conditioner heating operation?
You should wait for 1 to 4 minutes after starting the heating operation of your Daikin Air Conditioner. The system is designed to start discharging air only after it has reached a certain temperature.
What to do if Daikin FTY60GAV1A Air Conditioner indoor unit leaks water?
Call the service shop immediately if water leaks from the indoor unit of your Daikin Air Conditioner.
How to improve cooling or heating effect of Daikin FTY60GAV1A?
If you are experiencing a poor cooling or heating effect with your Daikin Air Conditioner, consider the following: * Ensure the air filters are clean. * Check for obstructions blocking the air inlet or outlet of both the indoor and outdoor units. * Verify that the temperature setting is appropriate for your needs. * Confirm that all windows and doors are properly closed. * Make sure the airflow rate and direction are set correctly.
What to do if Daikin Air Conditioner has abnormal functioning during operation?
If your Daikin Air Conditioner is experiencing abnormal functioning during operation, turn the breaker OFF, then turn it back ON, and try operating the air conditioner with the remote controller.
What to do if lightning may strike the neighbouring area when Daikin FTY60GAV1A is working?
If lightning may strike the neighboring area, stop operation of your Daikin Air Conditioner and turn the breaker OFF for system protection.
What to do after a power failure with Daikin Air Conditioner?
After a power failure, the Daikin Air Conditioner will automatically resume operation in about three minutes. Please wait for a while.
What to do if the power cord of Daikin FTY60GAV1A is abnormally hot or damaged?
Call the service shop immediately if the power cord of your Daikin Air Conditioner is abnormally hot or damaged.
General| Brand | Daikin |
|---|---|
| Model | FTY60GAV1A |
| Category | Air Conditioner |
| Language | English |
Defines WARNING and CAUTION levels and provides essential safety advisories.
Guidelines for safe operation, handling abnormalities, cleaning, and electrical safety.
Critical safety instructions for installation, grounding, and avoiding hazardous locations.
Specifies suitable and unsuitable environments for air conditioner installation.
Advice on selecting installation locations to avoid disturbing neighbors with noise or airflow.
Guidance on dedicated power circuits, earthing, and professional relocation services.
Identifies key parts of the indoor unit, including filters, grille, and control panel.
Instructions and safety precautions for opening the front grille of the indoor unit.
Details the functions and buttons of the remote controller for operation.
Labels the air inlet, air outlet, drain hose, and earth terminal of the outdoor unit.
Steps for inserting batteries into the remote controller and important battery usage notes.
Instructions for fixing the remote controller holder on the wall.
Important considerations regarding sunlight exposure, dust, and signal interference.
Procedure for opening the grille, removing, cleaning, and reinserting air filters.
Instructions for setting the current time on the air conditioner's display.
Recommendations for energy saving and specified operating conditions for different modes.
How to select and operate the air conditioner in different modes.
Guide to adjusting horizontal flap and vertical louvre for comfort.
How to change the temperature setting for COOL, HEAT, and AUTO modes.
Instructions for using the SWING button to adjust the horizontal flap automatically.
How to manually adjust the vertical louvre using the control knob.
How to activate POWERFUL operation for maximum capacity and its duration.
Specific effects of POWERFUL mode on temperature, airflow, and other functions.
Steps to set the OFF timer for automatic shut-off and NIGHT SET MODE.
Steps to set the ON timer for automatic start-up.
Example of setting both ON and OFF timers for sequential operation.
Information on timer memory, actual operation time, and cases requiring timer reset.
Procedure for cleaning air filters, recommended frequency, and impact of dusty filters.
Guidelines for replacing air purifying filters and their part numbers.
Instructions for wiping clean the indoor/outdoor units and the remote controller.
Detailed steps for removing, cleaning, and reattaching the front grille.
Checks for outdoor unit integrity, airflow blockages, and drain hose function.
Steps to prepare the unit for extended periods of non-use, including fan operation and power off.
Explanations for common situations that are not actual malfunctions.
Checks to perform for common issues like no operation or poor cooling/heating.
Steps to take for abnormal operation, including power resets and contacting service.
Conditions requiring immediate service calls and warnings against self-repair.
Guidance on automatic restart after power failure and system protection during lightning.
Advice on professional maintenance for optimal performance and longevity.
To Next Page
