To Next Page
H
hillstaceySep 12, 2025
Why doesn't hot air flow out soon after starting the Daikin Air conditioning heating operation?
- SSara BrownSep 12, 2025
You should wait for 1 to 4 minutes.
Why doesn't hot air flow out soon after starting the Daikin Air conditioning heating operation?
You should wait for 1 to 4 minutes.
What to do if Daikin FVKS35BVMB Air Conditioner has an abnormal functioning during operation?
If your Daikin Air Conditioner is malfunctioning, turn the breaker OFF, then turn it back ON, and try using the remote controller to operate the air conditioner.
What to do if Daikin Air Conditioner does not operate and OPERATION lamp is off?
If your Daikin Air Conditioner isn't working and the OPERATION lamp is off, check the following: ensure that a breaker hasn't turned OFF or a fuse hasn't blown, verify there isn't a power failure, confirm that batteries are correctly placed in the remote controller, and check that the timer setting is correct.
How to get rid of odour from Daikin Air Conditioner indoor unit?
If the indoor unit of your Daikin Air Conditioner is emitting an odor, it is recommended to have the indoor unit professionally cleaned by a technician.
What to do if an abnormal functioning happens during operation of Daikin FVKS35BVMB Air Conditioner?
If your Daikin Air Conditioner is experiencing abnormal functioning during operation, turn the breaker OFF, then turn it ON again. Try operating the air conditioner with the remote controller.
What to do if my Daikin Air Conditioner does not operate and the OPERATION lamp is off?
If your air conditioner isn't working and the OPERATION lamp is off, check a few things: first, see if a breaker has been turned OFF or a fuse has blown. Next, verify whether there's a power failure. Also, ensure that batteries are properly set in the remote controller, and the timer setting is correct.
What to do if there is an abnormal functioning during operation of my Daikin FVKS35BVMB?
If your Daikin Air Conditioner is experiencing abnormal functioning during operation, turn the breaker OFF, then turn it back ON. After that, try operating the air conditioner with the remote controller.
What to do if my Daikin Air conditioning does not operate and the OPERATION lamp is off?
If your Daikin air conditioner isn't operating and the OPERATION lamp is off, check the following: Has a breaker turned OFF or a fuse blown? Is there a power failure? Are batteries properly set in the remote controller? Is the timer setting correct?
Why does my Daikin FVKS35BVMB Air Conditioner outdoor unit emit water or steam?
In HEAT mode, the frost on the outdoor unit melts into water or steam when the air conditioner is in defrost operation. In COOL or DRY mode, moisture in the air condenses into water on the cool surface of outdoor unit piping and drips.
How to deal with odour from the indoor unit of my Daikin FVKS35BVMB Air Conditioner?
If your indoor unit gives out an odour, it is recommended to have the indoor unit washed by a technician.
General| Brand | Daikin |
|---|---|
| Model | FVKS35BVMB |
| Category | Air Conditioner |
| Language | English |
Crucial warnings and cautions for the safe operation and installation of your Daikin air conditioner.
Identifies and explains the key components of the indoor and outdoor units.
Step-by-step instructions for installing batteries and setting up the remote controller.
How to choose between AUTO, DRY, COOL, HEAT, and FAN modes for optimal comfort.
Adjusting horizontal flaps and vertical louvres for personalized air distribution.
Activates rapid cooling or heating for a quick comfort boost.
Lowers outdoor unit noise, ideal for quiet operation, especially at night.
Records and recalls preferred settings for energy efficiency and comfort.
Set ON and OFF timers for automatic system activation and deactivation.
Specific instructions for operating multiple indoor units connected to one outdoor unit.
Procedures for cleaning the unit's exterior, front grille, and air filters for optimal performance.
Addresses common air conditioner problems, their causes, and recommended solutions.
Guides on using the remote controller to display and interpret error codes for troubleshooting.
