4
Features
Compact
■ Light-weighted, good-looking appearance, and compact and solid structure.
■ 235 mm height, allowing installation on the ceiling with a limited space.
Low-noise
■ Low-noise motor for driving the low speed fan with a wide impeller; strictly tested before delivery.
■ Precise distance between the impeller inlet/outlet and the heat exchanger for more reasonable air ow
distribution.
■ Highly efcient sound-absorbing and heat-preserving materials inside to minimize noises produced by the unit.
Reliable
■ Single-phase capacitor motor with the protection grade IP20 and insulation grade B to ensure operation safety.
■ Permanently lubricated and sealed ball bearing with high precision, which is provided by internationally famous
brands and receives processing including hardening and tempering as well as chroming.
■ Motor power outlet wires protected by metal hoses to ensure its durability.
■ Working pressure up to 1.6 MPa and test pressure up to 2.0 MPa for the heat exchanger to endure high
pressures and prevent leakage.
High Efciency
■ Heat exchanger with the high-quality mechanically expanded copper pipe and hydrophilic aluminum ns to
ensure high efciency.
■ Intensied air supply using a large air ow fan with a wide impeller to maximize the heat transfer performance.
■ Precise matching of the fan and motor to guarantee the maximum cooling capacity but a low power input.
Flexible
■ Multiple external static pressures designed based on the unit’s cooling capacity, meeting the air supply
requirements at different distances.
■ Optional bottom return air plenum or back return air plenum with support for onsite changes, featuring time
saving.
■ Variable accessories for more options.
Anti-leakage
■ Delicate condensate-proof drain pan made of the cold-rolled steel through one-time impact molding, with
coating on both sides and high-quality heat-preserving materials on the exterior.
■ Unique independent mounting bracket without soldering seams or joints, requiring no bolts for xing to prevent
damages to the drain pan heat-preserving layer or cold bridges.
■ Tilt structure for rapid condensate water drainage.
To Next Page
Loading...
