What to do if my Daikin Air Conditioner system does not operate at all?
If your Daikin Air Conditioner system isn't operating at all, first ensure there isn't a power failure and wait for the power to be restored. If a power failure occurred during operation, the system will restart automatically after power is restored. Also, check if a fuse has blown or a breaker is activated; replace the fuse or reset the breaker if needed.
Why does my Daikin Air Conditioner system stop immediately after starting operation?
If your Daikin Air Conditioner system stops immediately after starting, check if the air inlet or outlet of either the outdoor or indoor unit is blocked by any obstacles. Remove any obstructions to ensure air can flow freely. Also, check if the air filter is clogged.
Why is my Daikin Air Conditioner cooling or heating insufficient?
If your Daikin Air Conditioner is operating but the cooling or heating isn't sufficient, try these steps: * Check if the air inlet or outlet of the outdoor or indoor unit is blocked. Remove any obstacles to ensure free airflow. * Check if the air filter is clogged. * Verify the temperature setting and fan speed setting. * Ensure all doors and windows are closed, and use curtains or blinds to block direct sunlight. * Consider if there are too many occupants or excessive heat sources in the room, as this can decrease the cooling effect.
What to do if my Daikin FXDA10A2VEB Air Conditioner operation stops suddenly and the operation lamp blinks?
If your Daikin Air Conditioner stops suddenly and the operation lamp is blinking, check the following: * See if the air filter is clogged. * Make sure that the air inlet or outlet of the outdoor or indoor unit isn't blocked. Remove any obstacles, turn the breaker OFF and then back ON. If the lamp continues to blink after these steps, you should contact your dealer.
What to do if my Daikin Air Conditioner displays an error code?
If your Daikin Air Conditioner's user interface shows an error code, make sure to notify your installer and report the error code. Consult the user interface reference guide to display the error code.
What to do if the safety device actuates frequently on my Daikin Air Conditioner?
If a safety device such as a fuse, a circuit breaker, or a residual current device frequently actuates, or if the ON/OFF switch of your Daikin Air Conditioner does not function properly, turn OFF all main power supply switches to the unit.
General| Capacity | 1.0 HP |
|---|---|
| Refrigerant | R32 |
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240 V, 50 Hz |
| Noise Level (Outdoor Unit) | 48 dB(A) |
| Outdoor Unit Dimensions (W x H x D) | 780 x 550 x 285 mm |
To Next Page
