Installation EDUS39-600-F2_a
18 FXDQ-M
Be sure to check the type of R-410A refrigerant to be used
before installing the unit.
NOTE: Using an incorrect refrigerant will prevent normal
operation of the unit.
For the installation of an outdoor unit, refer to the installation
manual attached to the outdoor unit.
2-1 PRECAUTIONS
• Be sure to instruct customers how to properly operate the
unit,such as operating different functions and adjusting the
temperature, by having them carry out operations them-
selves while looking at the operation manual.
• Do not install in locations where the air contains high levels
of salt such as near the ocean and where voltage fluctuates
greatly such as in factories, vehicles or vessels.
2-2 ACCESSORIES
Check that the following accessories are included with your
unit:
2-3 OPTIONAL ACCESSORIES
• This indoor unit requires one of the operation remote con-
trols listed below.
Name
Metal
clamp (1)
Drain hose
(2)
Insulation for fitting Sealing pad
Quantity 1 pc. 1 pc. 1 each 1 each
Shape
for liquid pipe (3)
for gas pipe (4)
Large (5)
mid. (6)
Name
Screws for duct
flanges (7)
Washer for
hanger bracket (8)
Clamp
Washer fixing
plate (11)
Quantity 1 set 8 pcs. 1 set 4 pcs.
Shape
Large (9)
8 pcs.
small (10)
4 pcs.
Name
Conduit mount-
ing plate
Screw for conduit
mounting plate
Pipe insulation
Quantity 1 pc. 2 pcs. 1 pc.
Shape
Name
Sealing material (12)
Air filter (13)
• Operation manual
• Installation manual
Quantity 2 pcs. 1 pc.
Shape
Remote controller
Wired type BRC1D71
Wireless type BRC4C82
24 pcs.
To Next Page
Loading...
