Specifications EDUS39-600-F2_a
4 FXDQ-M
Slim Ceiling-Mounted Duct Type
Notes:
1. Nominal cooling capacities are based on the following conditions:
Return air temperature: 80°FDB, 67°FWB
Outdoor temperature: 95°FDB
Equivalent ref. piping length: 25 ft / 7.5 m (Horizontal)
2. Nominal heating capacities are based on the following conditions:
Return air temperature: 70°FDB.
Outdoor temperature: 47°FDB, 43°FWB
Equivalent ref. piping length: 25 ft / 7.5 m (Horizontal)
3. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
4. The airflow is set to STANDARD before leaving the factory. You can switch between STANDARD ESP and HIGH ESP with the remote controller.
Refer to the fan curves for actual fan performance.
5. Anechoic chamber conversion value, measured under JISB8616 conditions. During actual operation,
these values are normally somewhat higher as a result of installation conditions.
6. Refer to page 10 for Power Input.
Model FXDQ18MVJU FXDQ24MVJU
Cooling Capacity
1
Btu/h 18,000 24,000
Heating Capacity
2
Btu/h 20,000 27,000
Casing / Color Galvanized Steel Plate Galvanized Steel Plate
Dimensions: (H × W × D)
in
(mm)
7-7/8
× 35-7/16 × 24-7/16”
(200 x 901.7 x 622.3 mm)
7-7/8 × 43-5/16 × 24-7/16”
(200 x 1100 x 622.3 mm)
Coil (Cross
Fin Coil)
Rows × Stages × FPI 3
× 12 × 17 3 × 12 × 17
Face Area ft² 1.89’ 2.44’
Fan
Model — —
Type Sirocco Fan Sirocco Fan
Motor Output kW 0.13 0.13
Air Flow Rate (H/L) cfm 440/350 (H/L) 580/460 (H/L)
External Static Pressure
4
in.Wg 0.17 - 0.06 0.17 - 0.06
Drive Direct Drive Direct Drive
Temperature Control
Microprocessor Thermostat
for Cooling and Heating
Microprocessor Thermostat
for Cooling and Heating
Sound Absorbing Thermal Insulation Material Foamed Polyethylene Foamed Polyethylene
Air Filter Removal, Washable, Mildew Proof Removal, Washable, Mildew Proof
Piping
Connections
Liquid Pipes in / mm φ1/4” / 6.4 mm (Flare Connection) φ3/8” / 9.5 mm (Flare Connection)
Gas Pipes in / mm φ1/2” / 12.7 mm (Flare Connection) φ5/8” / 15.8 mm (Flare Connection)
Drain Pipe in / mm
External Dia. 1-1/32” / 26.2 mm
Internal Dia. 25/32” / 19.8 mm
External Dia. 1-1/32” / 26.2 mm
Internal Dia. 25/32” / 19.8 mm
Machine Weight (Mass) Lbs 63 71
Sound Level (H/L)
5
dBA 35/31 36/32
Safety Devices
Fuse,
Thermal Protector for Fan Motor
Fuse,
Thermal Protector for Fan Motor
Refrigerant Control Electronic Expansion Valve Electronic Expansion Valve
Connectable outdoor unit R-410A Series R-410A Series
Standard Accessories
Operation Manual, Installation Manual, Paper Pattern for
Installation, Drain Hose, Clamp Metal, Insulation for Fitting,
Sealing Pads, Clamps, Screws, Washers, Conduit Mounting
Plate, Insulation Tube.
Operation Manual, Installation Manual, Paper Pattern for
Installation, Drain Hose, Clamp Metal, Insulation for Fitting,
Sealing Pads, Clamps, Screws, Washers, Conduit Mounting
Plate, Insulation Tube.
Drawing No. C:3D051780A
To Next Page
Loading...
