User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
240
You can enter a value in the 0 to 2000000 range, in increments of 0.1.
The CO
2
conversion factor for the energy consumption appears in (39). The unit displayed
depends on the selected energy type. Touch the Modify button and enter the conversion factor in
the Numerical Input dialog that appears.
You can enter a value in the 0 to 9999.999 range, in increments of 0.001.
(40) appears a new energy conversion type is registered in the Energy Conversion Type screen.
The displayed unit will depend on the energy type ([Unit registered in the new conversion type]/
kWh). Enter the conversion factor if necessary.
You can enter a value in the 0 to 9999.999 range, in increments of 0.001.
When nished, touch the OK button to save the settings and return to the Bud/Act set screen.
To Next Page
Loading...
