56
Separately Sold Parts
Contact the place of purchase.
Replacement part Replacement part
Dust collection lter
(1 pc.)
Model: BAFT501A
Humidifying lter (without frame)
(2 pcs.)
Model: KNME108A4E
• Replace about every 10years.
• Catches dust and pollen.
• Replace about every 10years.
• Humidies air by vaporising water during Humidifying
Operation.
• Failure to maintain parts properly may result in:
• Reduced air purifying capacity
• Reduced deodorising capacity
• Emission of odours
• Observe local waste separation rules when disposing of the dust collection lter (made of polyester and polypropylene) and the
humidifying lter (made of polyester).
Disposal requirements
• Units are marked with the following symbol:
This means that electrical and electronic products may not be mixed with unsorted household waste. Do NOT try to
dismantle the system yourself: the dismantling of the system, treatment of the refrigerant, of oil and of other parts
must be done by an authorized installer and must comply with applicable legislation.
Units must be treated at a specialized treatment facility for reuse, recycling and recovery. By ensuring this product is disposed of
correctly, you will help to prevent potential negative consequences for the environment and human health. For more information,
contact your installer or local authority.
Troubleshooting
01_EN_3P693798-1B.indd 56 2023/06/26 13:34:20
To Next Page
Loading...
Need help?
General
