Do you have a question about the Daikin MCK55WVM and is the answer not in the manual?
Type | Air Cleaner |
---|---|
Model | MCK55WVM |
Ionizer | Yes |
Weight | 9.5 kg |
Humidifying function | Yes |
Humidification rate | 500 ml/h |
Odor filter | Yes |
Dust sensor | Yes |
Technology | Streamer Technology, Active Plasma Ion Technology |
Filter Type | HEPA Filter |
Air Flow Rate | 306 m³/h |
Air Purification Method | HEPA Filter |
Noise Level | 19 dB (Silent Mode) |
Decomposes adsorbed odour via high-speed electrons for deodorising.
Generates active compounds to combat mould and allergens on surfaces.
Eliminates 99% of airborne particles between 0.1-2.5µm.
Critical warnings and cautions for preventing injury, fire, or property damage.
Guidelines for optimal and safe operation in various environments.
Identifies key parts on the front, back, and removable sections of the unit.
Functions of the operating panel and signal receiver.
Explains the buttons and their operations on the remote controller.
Explains lamps for water supply, child lock, mode, power, and humidifier.
Details the Dust/PM2.5 and Odour sensor lamp colors.
Explains water supply lamp behavior and sensor lamp detection.
Explains humidity monitoring and streamer operation indicators.
Lists included items and how to attach casters.
Step-by-step guide to install the deodorising filter.
Optimal placement guidelines for effective operation.
Instructions for filling, securing, and checking the water tank.
Attaching the holder and replacing the battery.
Connecting the unit to the power socket safely.
How to activate and use the air purification function.
Adjusting fan speed for desired air purification.
Combined operation for humidifying and cleaning air.
Setting the desired humidity level for the room.
Selecting specific operating modes (AUTO FAN, ECONO, etc.).
Details on how each mode functions.
Prevents accidental operation by small children.
Controls the brightness of the unit's indicator lights.
Adjust streamer discharge for odor control.
Control the active plasma ion function.
Enable/disable operational notification sounds.
Adjust sensor sensitivity for accurate detection.
Configure Monitoring mode behavior within ECONO.
Instructions for cleaning the outflow grille, unit, and pre-filter.
Cleaning the sensor lens and cover.
Cleaning the water tank and humidifying tray.
Cleaning the humidifying filter unit.
Detailed steps for cleaning the humidifying filter.
How to reattach the float if it detaches.
Soaking and cleaning methods for filters.
Important warnings during humidifying filter cleaning.
Diagrams of filter unit components.
Step-by-step guide to install new filters.
Steps to replace the dust collection filter.
Instructions for storing the unit when not in use.
Specific steps for storing without humidifying.
Troubleshooting for streamer, HUM monitor, and AUTO FAN lamps.
Issues related to humidity and FAN lamps blinking together.
Common questions about sensor sensitivity and filter cleaning.
FAQs on humidification and visible steam.
Steps for unresponsive unit and sounds during operation.
Troubleshooting whistling, fluttering, or loud operating sounds.
Explains why lamps might not light up or blink.
Interpreting sensor lamps and streamer lamp behavior.
Reasons for reduced air purification performance.
Causes and solutions for odors or lack of emission from the air outlet.
Steps when humidification fails or water isn't used.
Issues with humidity readings and rising ambient humidity.
Troubleshooting high humidity and water splashing.
Technical specs: model, power supply, dimensions, weight.
Details on consumption, airflow, humidifying rate, and coverage.
Contact details for DAIKIN's head offices and regional branches.