Operating the Unit in a MODE
Select a MODE specic to your needs.
Airow is adjusted automatically when the unit is running in a MODE.
Remote controller
Press
.
• Each press cycles between the MODE lamps [green].
(AUTO FAN) (ECONO)
(ANTI-POLLEN)
(MOIST)
Unit
Press
.
• Each press cycles between the MODE lamps [green] and FAN lamps [green].
(AUTO FAN) (ECONO) (ANTI-POLLEN) (MOIST)
(Turbo) (Standard) (Low) (Quiet)
FAN
MODE
FAN
Note
• The humidier is turned ON when MOIST MODE is selected.
• If FAN setting is set to Quiet or AUTO FAN MODE is selected after the unit has been running in MOIST MODE for a while,
the Humidifying operation will continue.
(The Humidity level will be the level selected before MOIST MODE was activated.)