Daikin MCK55WVM - Understanding Indicator Lamps; Key Indicator Lamp Functions; Sensor and Air Quality Indicators

9
Names of Parts and Operations
Read First
Operating/Indicator panel
When a lamp is blinking
►
Page 30
1
Water supply lamp [red]
When the water tank is empty
during the Humidifying operation, a
tone (3 long beeps) will sound and
the lamp will light up.
2
Child proof lock lamp [orange]
Lamp will be lit when the child proof lock is
active.
MODE lamps [green]
Indicate the MODE in operation.
Humidier ON/OFF lamp
[orange]
Lamp will light up when the
humidier is ON.
ON/OFF lamp [green]
Lamp will light up when the
power is ON.
FAN lamps [green]
Indicate the active FAN setting
(4settings: Quiet, Low, Standard,
Turbo).
Humidity lamps (humidity setting) [green]
Indicate the active humidity setting (3 settings: Low,
Standard, High).
3
Dust sensor lamp / PM2.5 sensor lamp
Indicates the volume of ambient dust in 3 colours: green,
orange, red.
• Green indicates that the air is clean.
• The dust/PM2.5 sensor can detect small (approx. 1.0-2.5μm)
and large (approx. 2.5μm and above) dust particles. The
PM2.5 lamp lights in response to small particles and the dust
lamp lights in response to large dust particles.
Green Orange Red
Few Many
Lamp colour
Dust
6
Streamer lamp [blue]
Lights up when the streamer is active.
5
HUM monitor lamps (approx.
ambient humidity) [blue]
Indicate room humidity within the range
30%-70%. (10% increments)
4
Odour sensor lamp
Indicates the intensity of odours in 3 colours: green, orange, red.
• Green indicates that the air is clean.
Green Orange Red
Low High
Lamp colour
Odours
01_EN_3P595628-1.indd 9 2019/12/13 15:56:55