5 Operation
Operation manual
10
FTXM60~71A2V1B
Daikin room air conditioner
3P728539-5F – 2024.01
5.7.3 To start/stop Econo and Outdoor unit
quiet operation
1 Press one or more times.
Result: The setting will change as follows.
Display Operation
Econo
Outdoor unit quiet
+
Econo and Outdoor unit quiet
— Both deactivated
2 To stop operation, press until both symbols disappear
from the LCD.
Note: Econo operation can be only set when the unit is running.
Pressing cancels the setting and disappears from the LCD.
Note: remains on the LCD, even if you turn off the unit using
the wireless remote control or indoor unit ON/OFF switch.
5.8 Flash Streamer (air cleaning)
operation
Streamer generates a high-speed electron stream with a high
oxidizing power, reducing bad odours. Together with the titanium
apatite deodorising filter, silver allergen removal air purifying filter
and the air filters, this function cleans the air in the room.
INFORMATION
▪ The high-speed electrons are generated and go away
inside the unit to ensure safe operation.
▪ The Streamer discharge may generate a fizzing sound.
▪ If the airflow becomes weak, the Streamer discharge
may stop temporarily to prevent ozone smell.
5.8.1 To start/stop Flash Streamer (air cleaning)
operation
Prerequisite: Make sure the unit is operating ( is displayed on
the wireless remote control LCD).
1 Press .
Result: is displayed on the LCD and the air in the room is
cleaned when the unit is operating.
2 To stop operation, press .
Result: disappears from the LCD and operation stops.
5.9 OFF/ON timer operation
Timer functions are useful for automatically switching the air
conditioner off/on at night or in the morning. You can also use OFF
timer and ON timer in combination.
There are two types of OFF/ON timer setting:
▪ 24 hour clock OFF/ON timer (default). The unit will stop/start
operating at the set time. Example: The ON timer is set to 13:30,
the unit will start operating at 13:30.
▪ 12 hour countdown OFF/ON timer. The unit will stop/start
operating after the set number of hours. Example: The ON timer
is set at 10:30 to 3 hours, the unit will start operating at 13:30.
Note: It is possible to combine both timer setting types.
INFORMATION
Program the timer again in case of:
▪ A breaker has turned the unit off.
▪ A power failure.
▪ After replacing batteries in the wireless remote control.
INFORMATION
The clock MUST be set correctly before using any timer
functions. Refer to "4.3To set the clock"[46].
5.9.1 24 hour clock OFF/ON timer setting
To start/stop OFF timer operation
1 Press to start.
Result: is displayed on the LCD and blinks.
and the day of the week disappear from the LCD.
2 Press or to change the time setting.
3 Press again.
Result: and the set time are displayed on the LCD. The Daikin
eye lights orange.
INFORMATION
Each time or is pressed, the time setting
advances by 10 minutes. Holding the button down will
change the setting rapidly.
4 To cancel the timer setting, press .
Result: The set time and disappear from the LCD. and the
day of the week are displayed on the LCD. The Daikin eye stops
lighting orange.
INFORMATION
When you set the ON/OFF timer, the time setting is stored
in the memory. The memory will be reset when the
wireless remote control batteries are replaced.
Night set mode
When the OFF timer is set, the air conditioner
automatically adjusts the temperature setting (0.5°C up in
cooling, 2.0°C down in heating) to prevent excessive
cooling/heating and ensure a comfortable sleeping
temperature.
To start/stop ON timer operation
1 Press to start.
Result: is displayed on the LCD and blinks. and
the day of the week disappear from the LCD.
2 Press or to change the time setting.
3 Press again.
Result: and the set time are displayed on the LCD. The Daikin
eye lights orange.
To Next Page
Loading...
