EasyManua.ls Logo

Daikin R36NUV1 User Manual

Daikin R36NUV1
501 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Pocket
Manual
Service Diagnosis
Si20 - 701_B

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Daikin R36NUV1 and is the answer not in the manual?

Daikin R36NUV1 Specifications

General IconGeneral
BrandDaikin
ModelR36NUV1
CategoryAir Conditioner
LanguageEnglish

Summary

1. List of Applicable Models

2. Symptom-based Troubleshooting

2.1 Overview

Lists common symptoms and their corresponding troubleshooting measures.

2.2 Equipment does not Operate

Troubleshooting steps for when the equipment fails to operate.

2.3 Indoor Unit Fan Operates, but Compressor does not Operate

Troubleshooting for fan operation without compressor activity.

2.4 Cooling / Heating Operation Starts but Stops Immediately

Troubleshooting for intermittent cooling/heating cycles.

2.5 After Unit Shuts Down, It cannot be Restarted for a While

Troubleshooting for delayed unit restart after shutdown.

2.6 Equipment Operates but does not Provide Cooling

Troubleshooting for units that run but don't cool.

2.7 Equipment Operates but does not Provide Heating

Troubleshooting for units that operate but do not provide heating.

2.8 Equipment Discharges White Mist

Explains causes and solutions for white mist discharge.

3. Troubleshooting by Remote Controller

3.1 Procedure of Self-diagnosis by Remote Controller

Steps for performing self-diagnosis using the remote controller.

3.2 Error Codes and Description

Lists and describes error codes for indoor units.

3.3 Detailed Error Codes

Provides detailed explanations for specific error codes.

3.4 A0 Error of External Protection Device

Error code A0 for external protection device issues.

3.5 A1 Indoor Unit PCB Abnormality

Error code A1 indicating an indoor unit PCB abnormality.

3.6 A3 Drain Water Level System Abnormality

Error code A3 related to drain water level system abnormalities.

3.7 A6 Indoor Unit Fan Motor Abnormality

Error code A6 for indoor unit fan motor abnormalities.

3.8 A6 Fan Motor (M1F) Lock, Overload

Error code A6 for fan motor lock or overload conditions.

3.9 A7 Swing Flap Motor Abnormality / Lock

Error code A7 for swing flap motor abnormalities or locks.

3.10 A8 Abnormal Power Supply Voltage

Error code A8 for abnormal power supply voltage.

Related product manuals