Need help?Do you have a question about the Daikin R36PUV2S and is the answer not in the manual?
General| Cooling Capacity | 3.6 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Noise Level | 20 dB |
| Outdoor Unit Noise Level | 48 dB |
Lists common operational symptoms and directs users to relevant troubleshooting sections.
Troubleshooting steps for cases where the equipment fails to start or operate.
Diagnosing issues when the indoor fan runs, but the compressor remains inactive.
Addresses problems like immediate shutdown after start or lack of cooling/heating.
Troubleshooting for delayed unit restarts after shutdown.
Steps to diagnose and resolve issues when the unit runs but fails to cool.
Steps to diagnose and resolve issues when the unit runs but fails to heat.
Covers phenomena like white mist discharge, abnormal noise, vibration, and dust discharge.
Detailed steps for performing self-diagnosis using the remote controller and interpreting error codes.
Summary table of indoor unit error codes, their descriptions, and applicable models.
Detailed explanations and diagnostic procedures for specific indoor unit error codes.
Troubleshooting for A-series errors including external protection, PCB abnormalities, and drain system issues.
Diagnostic steps for C-series errors related to thermistors, transmission, and PCB combinations.
Troubleshooting for E-series errors involving safety devices, PCB issues, and pressure sensors/switches.
Diagnostic procedures for L-series errors related to compressor lock, overcurrent, and inverter abnormalities.
Troubleshooting for U-series errors including refrigerant shortage, reverse phase, and power supply voltage problems.
Steps to resolve transmission and wiring errors between units and controllers (UA, UF, UH).
General checks and procedures for verifying system components and connections.
To Next Page