Daikin RE50NRV16 - Electrical Components

Si011281E Electrical Components
Removal Procedure 5
3. Electrical Components
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1. Remove the right side
panel.

The stop valve cover has 3
hooks.
1
Remove the screw and
remove the stop valve
cover.
2
Remove the 3 screws
and remove the wire
fixture.
3
Remove the 7 screws
on the terminal board
and disconnect the
connecting wire and the
power supply wire.
4
Remove the 2 screws
on the right side
(upper).
(R18993)
Stop valve cover
Wire fixture
Power supply wire
Connecting wire
(R18994)
(R19010)