Need help?Do you have a question about the Daikin RX35J3V1B and is the answer not in the manual?
General| Model | RX35J3V1B |
|---|---|
| Category | Heat Pump |
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R32 |
| Outdoor Unit Dimensions (H x W x D) | 550 x 765 x 285 mm |
| Noise Level (Outdoor Unit) | 48 dB(A) |
| Power Supply | 220-240V, 50Hz |
Discusses safety precautions and classifications for repair work and usage.
Explains the meaning of various icons used to highlight specific information in the manual.
Lists and categorizes various operational functions of the air conditioner.
Details technical specifications for indoor and outdoor units.
Provides wiring diagram for the indoor unit PCB and connectors.
Provides wiring diagram for the outdoor unit main PCB and filter PCB.
Details primary operational functions like temperature, frequency, and airflow control.
Explains how room temperature is detected and controlled by the unit.
Describes how compressor frequency is controlled by various parameters.
Explains flap and louver movement for air distribution in different modes.
Details the 9 steps of indoor fan speed and their control logic.
Explains humidity removal process and temperature/airflow settings.
Describes how the unit automatically selects cooling or heating mode.
Explains thermostat operation based on temperature differences.
Describes automatic adjustment of target temperature for sleep comfort and energy saving.
Explains reduced current and power consumption for energy saving.
Details operation to maximize cooling/heating capacity.
Instructions on how to set the unit's clock.
Covers Hot-Start, Signal Receiving, ON/OFF button, Air-Purifying Filter, and Auto-restart.
Explains the role of various thermistors in the system's operation.
Outlines operating modes, frequency control, and system logic.
Lists common symptoms and their corresponding checks and measures.
Explains how to use the remote controller to access error codes and diagnose issues.
Lists error codes, their descriptions, and corresponding reference pages for troubleshooting.
Details troubleshooting for specific errors like PCB, fan motor, thermistors, and refrigerant issues.
Procedures for checking components like thermistors, fan motors, valves, and power modules.
Covers pump down, forced cooling, trial operation, field settings, and silicon grease application.
Procedures for pump down operation for environmental protection.
Details conditions, start, end, and commands for forced cooling operation.
Guides on performing trial operation to check unit functions and parts.
Settings for multiple units and jumper configurations.
Explains applying silicon grease for heat radiation when replacing PCBs.
Provides diagrams illustrating refrigerant piping for indoor and outdoor units.
Illustrates the electrical wiring connections for indoor and outdoor units.
References specific booklets for unit removal procedures.
To Next Page
