To Next Page
F
Francisco CherrySep 7, 2025
How to fix Daikin Air Conditioner operation that does not start soon?
- BbenjaminkarenSep 8, 2025
If your Daikin Air Conditioner operation does not start soon, you should wait for about 3 minutes.
How to fix Daikin Air Conditioner operation that does not start soon?
If your Daikin Air Conditioner operation does not start soon, you should wait for about 3 minutes.
Why hot air does not flow out soon after starting heating operation on my Daikin RXS35BVMB?
If hot air does not flow out soon after you start the heating operation on your Daikin air conditioner, you should wait for 1 to 4 minutes.
What to do if my Daikin RXS35BVMB does not operate and the OPERATION lamp is off?
If your Daikin air conditioner isn't operating and the OPERATION lamp is off, check these items: * Confirm that a breaker hasn’t turned OFF or a fuse blown. * Check for a power failure. * Ensure batteries are properly set in the remote controller. * Verify that the timer setting is correct.
What to do if an abnormal functioning happens during Daikin Air Conditioner operation?
If an abnormal functioning occurs during operation of your Daikin air conditioner, turn the breaker OFF, then turn it back ON, and try operating the air conditioner with the remote controller.
General| Category | Air Conditioner |
|---|---|
| Type | Split System |
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Weight (Outdoor Unit) | 30 kg |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Outdoor Unit Noise Level | 48 dB |
General safety precautions to be followed before performing repair work.
Safety precautions to be observed after the repair work is completed.
Procedures and checks to be performed after the repair is finished.
Explanation of icons used in the manual to draw attention to specific information.
Lists the functions available for the Cooling Only models.
Lists the functions available for the Heat Pump models.
Technical specifications for Cooling Only models (Indoor and Outdoor units).
Technical specifications for Heat Pump models (Indoor and Outdoor units).
Wiring diagram for the indoor unit's printed circuit boards and connectors.
Wiring diagram for the outdoor unit's printed circuit boards and connectors.
Details on core functions like inverter principle, airflow, fan speed, and operational modes.
Explains the main components and the role of thermistors in system operation.
Covers mode hierarchy, frequency control, start-up controls, discharge pipe, input current, freeze-up, peak-cut, fan, moisture, defrost, expansion valve, malfunctions, forced operation.
General overview of system configuration after installation and test operation.
Covers safety precautions, parts identification, operation modes, adjustments, and special features.
Provides guidance on care, cleaning, and resolving common issues.
Important cautions to consider before performing diagnostic procedures.
Lists common operational problems and their corresponding solutions.
Explains how to use the service check function for error code display.
Comprehensive guide to diagnosing and resolving various system errors.
Procedures for checking key components like EV, Four Way Valve, Thermistors, Installation, Pressure, Fan, Power, Refrigerant, Capacitor, Transistor, Hall IC.
Step-by-step instructions for disassembling indoor unit components like filters, grille, blades, PCB, fan, etc.
Step-by-step instructions for disassembling outdoor unit components like casing, PCB, fan, compressor, valves, etc.
Covers trial operation, jumper settings, and intelligent eye sensor adjustment.
Visual diagrams showing piping and wiring connections for indoor and outdoor units.