Daikin SiEN04-306D - Page 169

Indoor Unit SiEN04-306D
160 Removal Procedure
7. Remove the swing motor
for vertical blades.
1
Release the swing axis
on the right side.
 Releasing the swing axis
2
Loosen the two screws
and detach the swing
motor assembly.
3
Loosen the two screws
and remove the swing
motor.
 Six claws hold the assembly.
Step
Procedure Points
(1)Undo the claw
(2)Pull it out
(R2790)
Swing motor assembly
(R2791)
Claws
Claws
Swing motor
(R2792)