Need help?Do you have a question about the Daikin Siesta and is the answer not in the manual?
General| Refrigerant | R32 |
|---|---|
| Type | Split AC |
| Energy Rating | Varies by model |
| Cooling Capacity | 2.5 kW to 7.1 kW |
| Compressor Type | Rotary |
| Power Consumption | Varies by model |
| Heating Capacity | 2.5 kW to 7.1 kW |
| Energy Efficiency Ratio (EER) | Varies by model |
| Coefficient of Performance (COP) | Varies by model |
| Power Supply | 220-240V, 50Hz, Single Phase |
| Indoor Unit Dimensions (HxWxD) | Varies by model |
| Outdoor Unit Dimensions (HxWxD) | Varies by model |
| Indoor Unit Weight | Varies by model |
| Outdoor Unit Weight | Varies by model |
| Features | Sleep Mode |
Steps for mounting the outdoor unit, including structure, drainage, and securing.
Procedures for connecting refrigerant pipes to the outdoor unit, including oil traps and leak checks.
Methods for checking refrigerant piping for leaks, setup, and vacuum drying.
Steps for charging refrigerant, including determining amounts and applying labels.
Instructions for electrical wiring compliance and connections.
Final steps for installation, insulation, and resistance checks.
Pre-test run checks to ensure correct installation and safety.
Detailed steps and procedure for conducting the unit's test run.
Common error codes and their possible causes during test runs.
Information regarding the wiring diagram for the outdoor unit, symbols, and notes.
To Next Page