For FUY71/100/125FJ Si-71A
158 Removal Procedure
3.5 Removal of Drain Pan
Procedure
Warning Be sure to turn off all power supplies before disassembling work.
Step Procedure Points
∗
Remove suction grille according to
the Removal of air filter and that of
suction grille.
1. To dismount three corner
sections A, B and C, remove
a flocked screw.
2. Remove three flocked
screws to dismount corner
section D.
3. Disconnect wires and
connectors from PCB.
To Next Page
Loading...