Daikin SkyAir Super Inverter 70 D Series User Manual

SiE25-110 Procedure of Self-Diagnosis by Remote Controller
Troubleshooting 121
4. Procedure of Self-Diagnosis by Remote
Controller
4.1 The INSPECTION/TEST Button
Explanation The following modes can be selected by using the [Inspection/Test Operation] button on the
remote control.
Normal
mode
Inspection
mode
Test
operation
mode
Local
setting
mode
Service
mode
Depress Inspection/Test Operation button
for more than 4 seconds.
Depress Inspection/Test Operation button
for more than 4 seconds.
Press Inspection/Test Operation button once.
Press Inspection/Test Operation button once.
Or after 30 minutes
After 10 seconds
Press Inspection/Test Operation
button once.
Press Inspection/Test Operation
button once.
Indoor unit settings can be made
• Filter sign time
• Air flow direction
• Others
Following codes can be checked.
• Malfunction codes
• Indoor model code
• Outdoor model code
Service data can be obtained.
• Malfunciton code history
• Temperature data of various sections
Service settings can be made.
• Forced fan ON
• Air flow direction/volume setting
Thermostat is forcibly turned on.
(V0815)
Caution
Be sure to turn off power switch before connect or disconnect connector,
or parts damage may be occurred.

Daikin SkyAir Super Inverter 70 D Series Specifications

General

Series	D Series
Type	Split System
Cooling Capacity	7.1 kW
Heating Capacity	8.0 kW
Coefficient of Performance (COP)	3.61
Outdoor Unit Noise Level	50 dB(A)
Indoor Unit Weight	12 kg
Power Supply	220-240V, 50Hz
Refrigerant	R410A
Indoor Unit Noise Level	45 dB(A)