Daikin STREAMER MC55UVM6-7

Need help?

Do you have a question about the Daikin STREAMER MC55UVM6-7 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

The Daikin MC55UVM6 / MC55UVM6-7 is a floor-standing or desktop air purifier designed to improve indoor air quality through a combination of advanced technologies and a multi-layered filtration system.

Function Description:

The core of the air purifier's function lies in its "Streamer Technology" and "Active Plasma Ion Technology."

Streamer Technology: This system generates a "streamer discharge," a type of plasma discharge that produces high-speed electrons with powerful oxidative capacity. These electrons effectively decompose adsorbed odors, maintaining the deodorizing capacity of the unit without the need for frequent catalyst replacement. The streamer operation is conditional on the degree of air impurity. While a hissing sound may be heard during operation, this is normal and does not indicate a defect. Trace amounts of ozone may be generated, but the amount is negligible and harmless.
Active Plasma Ion Technology: This technology works to increase skin moisture content. Evaluation methods have shown that skin moisture content can increase by 1.8 times over approximately 120 minutes in a 10m² room with active plasma ion generation. Actual effects may vary based on the operating environment and usage patterns.
PM2.5 Control: The device is capable of eliminating 99% of 0.1-2.5μm particles in a 32m³ airtight space within 90 minutes or less, according to Japan Electrical Manufacturers’ Association standard (JEM1467). It can detect both small (approx. 1.0-2.5μm) and large (approx. 2.5μm and above) dust particles. However, it does not account for the inflow of new particles from outdoors due to ventilation and cannot eliminate all airborne toxic substances. The elimination of particulate matter less than 0.1μm has not been verified.
Comprehensive Air Purification: The unit offers powerful and swift suction driven by a large airflow, effectively capturing house dust and odors. Its 3-filter layer structure ensures thorough and rapid purification of ambient air, targeting a wide range of substances including pollen, dust mite droppings and remains, mold, odors, formaldehyde, diesel particulate matter, NOx, dust, and yellow sand.

Important Technical Specifications:

Model Name: MC55UVM6 / MC55UVM6-7
Power Supply: Single phase 50Hz 220-240V / 60Hz 220-230V
Operation Modes (Air Purifying): Turbo, Standard, Low, Quiet
Power Consumption (W):
- Turbo: 37W
- Standard: 15W
- Low: 10W
- Quiet: 8W
- (Approx. 1W consumed when power is off for microcomputer operation)
Operating Sound (dB):
- Turbo: 53dB
- Standard: 39dB
- Low: 29dB
- Quiet: 19dB
Airflow Rate (m³/h):
- Turbo: 330m³/h
- Standard: 192m³/h
- Low: 120m³/h
- Quiet: 66m³/h
Coverage Area (m²): 41m² (calculated according to JEM1467, when FAN setting is "Turbo")
External Dimensions (mm): 500(H) × 270(W) × 270(D)
Weight (kg): 6.8kg
Power Supply Cord Length (m): 1.8m

Usage Features:

Remote Controller: The unit can be operated via a remote controller, allowing for detailed settings adjustments.
ON/OFF Operation: Simple press of a button to start or stop air purifying.
Adjustable Airflow Rate: Four FAN settings (Quiet, Low, Standard, Turbo) are available, either manually selected or automatically adjusted in specific modes.
Operation Modes:
- AUTO FAN MODE: Automatically adjusts FAN setting (Quiet, Low, Standard, High) based on air impurity (volume of dust and intensity of odors). Purifying capacity increases with airflow rate.
- ECONO MODE (Saving Energy): Automatically switches FAN setting between Quiet and Low to minimize power consumption and operating sounds. If the air is clean, Monitoring mode activates, where the fan starts and stops periodically to monitor dust and odors, further reducing power consumption by turning off streamer and active plasma ion output. Air purifying capacity is reduced in this mode.
- ANTI-POLLEN MODE (Reducing Pollen Levels): Creates a gentle air current by switching between Standard and Low FAN settings every 5 minutes to draw in and capture pollen before it reaches the floor. Airflow is automatically adjusted in this mode.
Child Proof Lock: Restricts button operation to prevent misoperation by small children. Activated by holding down a button for 2 seconds.
Adjustable Indicator Lamp Brightness: Allows cycling through bright, dim, or off settings for the indicator lamps, useful during sleep hours. The ON/OFF lamp remains dim even when set to off.
Sensor Sensitivity Adjustment: The sensitivity of the Dust/PM2.5 sensor can be adjusted (High, Normal, Low) if it doesn't meet user preferences, especially if responsiveness is poor during high airflow settings.
Streamer Output Settings: The streamer output can be set to Regular or Low if the hissing sound or ozone smell is bothersome. Setting to Low reduces deodorizing capacity.
Active Plasma Ion Output Settings: The active plasma ion output can be turned ON or OFF if the ozone smell is bothersome.

Maintenance Features:

Outflow Grille: Can be wiped with a soft damp cloth or washed with water if dirt buildup is severe.
Unit Body: Can be wiped with a soft damp cloth.
Pre-filter (Front/Left-side/Right-side): Recommended for vacuum cleaning every 2 weeks. Can be washed with water if dirt buildup is severe, then air-dried in the shade.
Dust/PM2.5 Sensor: Periodic cleaning is recommended every 3 months. The air intake for the sensor should be vacuumed, and the lens wiped with a dry cotton bud.
Deodorizing Filter Unit: Can be vacuum cleaned if concerned about odors or dirt. If odors persist, the surface can be lightly wetted with an atomiser and air-dried in a shaded, well-ventilated area. It cannot be cleaned with water as it may lose its shape and become unusable.
Dust Collection Filter (Electrostatic HEPA Filter): This filter should not be cleaned with a vacuum cleaner or water. It needs to be replaced approximately every 10 years, depending on usage patterns and air impurity levels. Separately sold part (Model: KAFP080B4E).
Streamer Unit: Replacement may be necessary if the streamer lamp blinks, especially in environments with oils, high dust/humidity, or chemical agents. Contact the place of purchase for replacement.
Storage: When not using the unit for long periods, remove the power supply plug, clean all parts (especially those washed with water must be completely dry), and cover the air outlet and other openings with a plastic bag to prevent dust entry. Store the unit upright in a dry place.