Daikin UAA-ST3M - Page 22

Page | 21
• Set-Up
No.
Menu
Property
Unit
Description
1.
Available
Modes
R
-
Set the available modes for the unit:
Cool: Cooler only
Cool/Ice w/Glycol: Cooler only, Ice
Storage, Glycol
Cool/Heat: Heat Pump
Cool/Ice/Heat w/Glycol: Heat Pump
Unit, Ice Storage, Glycol
Test: Test mode
2.
Start Up DT
R
°C
View the start-up temperature
difference
3.
Shut Dn DT
R
°C
View the stop temperature difference
4.
Stg Up DT
R
-
View the temperature difference for
starting next compressor
5.
Stg Dn DT
R
-
View the temperature difference for
stopping next compressor
6.
Max Pulldn
R
°C/min
View the evaporator entering water
temperature maximum pull down rate
for cooling mode
7.
Stg Up Delay
R
min
View the remaining time for starting
the next compressor
8.
Stg Dn Delay
R
min
View the remaining time for stopping
the next compressor
9.
Unit En Init
R
-
Reserved
10.
Ice Cycle Dly
R
hour
View the cycle time of ice storage
mode