View or set the ambient temperature when
it is the maximum adjustment using “Oat”
to adjust the evaporator
leaving water temperature setpoint
View or set the ambient temperature when
adjustment starts using “Oat” to adjust the
evaporator leaving water temperature
setpoint
View or set the softload function
View or set the softload time
View or set the capacity for softload function
Any changes in this menu will be
effective after confirmed here
View or set the function of dynamically
obtaining the controller IP address
View the current IP address of the
controller
View the current subnet mask of the
controller
View the current gateway of the
controller
View or set the IP address
View or set the subnet mask
View whether the menu password
function is disabled