Need help?Do you have a question about the Daikin VRV-WII RWEYQ-MY1 Series and is the answer not in the manual?
General| Series | VRV-WII |
|---|---|
| Model | RWEYQ-MY1 |
| Category | Heat Pump |
| Refrigerant | R410A |
| Control System | Daikin Intelligent Touch Controller |
| Indoor Unit Compatibility | Compatible with a wide range of indoor units |
Provides detailed technical specifications for the outdoor unit, including capacity and dimensions.
Details water flow characteristics and head loss for system design.
Outlines electrical requirements such as voltage, current, and fuse ratings.
Lists available optional accessories for the outdoor unit, such as selectors and boxes.
Details restrictions and examples for connecting multiple outdoor units with piping kits.
Specifies dimensions and characteristics of the water piping strainer accessory.
Presents detailed cooling capacity (TC) and power input (PI) data under various conditions.
Provides cooling capacity data for systems using glycol, under various conditions.
Presents detailed heating capacity (TC) and power input (PI) data under various conditions.
Provides heating capacity data for systems using glycol, under various conditions.
Illustrates capacity changes based on equivalent pipe length and level differences.
Illustrates the physical dimensions and connection points of the outdoor unit.
Shows the center of gravity for the outdoor unit, relevant for handling and installation.
Visual schematic of the refrigerant and water piping system within the outdoor unit.
Shows the internal electrical wiring of the outdoor unit, including component identification.
Illustrates external wiring connections between outdoor and indoor units and power supply.
Presents sound pressure levels across different octave bands for the outdoor unit.
Specifies required service and ventilation space around the outdoor unit for installation.
Provides guidelines for selecting refrigerant pipe sizes based on capacity and length.
Illustrates the allowable operating ranges for inlet water and indoor temperatures.
Crucial safety precautions and warnings for handling and installing the outdoor unit.
Provides an overview of the VRV inverter series and its applications.
Details important considerations for choosing a suitable installation location for the outdoor unit.
Instructions for checking the unit upon delivery and safe handling during installation.
Guidance on safely unpacking and positioning the outdoor unit on its foundation.
Details requirements and procedures for connecting the water piping for the unit.
Provides instructions for installation, maintenance, and cleaning of the plate type heat exchanger.
Covers all aspects of field wiring, including power circuits, optional parts, and connection examples.
Details guidelines for selecting piping material, protection, and connection methods for the refrigerant system.
Lists essential checks to be performed after the installation is completed.
Describes the procedure for performing a test run and checking operation status.
To Next Page