Daikin WGZ200DW - Setpoints

IOM 1322 • WATER-COOLED SCROLL COMPRESSOR 52 www.DaikinApplied.com
Setpoints
The following parameters are remembered during power o󰀨, are factory set to the Default value, and can be
adjusted to any value in the Range column.
The PW (password) column indicates the password level that must be active in order to change the setpoint.
Passwords are as follows:
O = Operator [0100] M = Manager [2001]
Table 45: Setpoints (setpoints with * are set at Daikin Applied factory)
