DAISHIN SRM180K - User Manual

DAISHIN SRM180K Page 3
INTRODUCTION
Forword to the user
The DAISHIN team thanks you for your purshase.
Read this manual before any use of your mower, only the herein instructions shall help you to achieve an
efficient and safe work.
A safe use will only result from the manner you will use the machine in accordance with the restrictions
described in this manual. Thus, you must know and follow all the safety measures in this manual and those
relating to the use of your mower.
The MOWER that you have just bought has been designed and manufactured for your entire satisfaction. As any
other mechanical machine, it requires a proper maintenance and must be kept clean. Grease the machine like
indicated. Follow the rules and safety indications as described in this manual and as showed on the preventive
instruction stickers.
About maintenance, always mind that your DAISHIN dealer has the skills, the genuine parts and the necessary
tools to solve the possible problems.
Use only the DAISHIN original parts : “ non genuine ” parts will not assure you of a correct and safe
working and are likely to make the guarantee null and void. Write the name and the serial number of
your machine hereunder :
MODEL :.......................................................................................
SERIAL NUMBER (refer to the pictures herein) :.........................
Always mention these informations to your dealer in order to obtain the right parts.
Concerned about constant progress, DAISHIN keeps the right to modify the machines without being compelled
to modify those already sold.
The illustrations and specifications in this manual might lightely differ from your machine because of the constant
improvements made by our production department.
In this manual, the left and the right hand or the rear and the front position are determined according to the
mower handlebar.
All along this manual the word IMPORTANT is used to indicate that a fault might cause damage to the machine.
The words WARNING, CAUTION and DANGER are used with the “ safety/warning ” pictogram (triangle with an
exclamation mark) in order to indicate a hazard for your safety.
This symbol indicates that you must be very attentive because your safety is at stake. It reminds that you must
follow the safety instructions and pay attention to hazardous operations that might cause injuries.
WARNING
Reminds the safety rules that might cause injury if they are not respected
CAUTION
Remembers to pay attention to a real danger that is likely to cause injury or even death if no proper precaution is
taken.
Indicates a major hazard that is most likely to cause irremediable injury or death if the right precautions are not
taken.

Summary

INTRODUCTION

User Welcome and Manual Purpose

A message from DAISHIN thanking the user and outlining the manual's purpose.

Safety, Usage, and Symbols

Emphasizes safe use, restrictions, maintenance, and explains safety symbols like DANGER, WARNING, CAUTION.

SPECIFICATIONS

Model Details

Lists model, dimensions, engine, transmission, speed, cutting width, height, weight.

CHECK LIST

Pre-Delivery and Delivery Procedures

Outlines dealer responsibilities and checks for machine readiness before and at delivery.

SAFETY RULES

General Operating Safety

Covers essential safety rules for operation, including personal protection and machine handling.

Slope and Intervention Safety

Critical guidelines for slope operation, machine interventions, and tool usage safety.

DIFFERENT PARTS OF THE MOWER

Component Identification

Illustrates and labels key parts of the mower, including controls, engine, and deck.

SAFETY INSTRUCTION STICKERS

Sticker Placement and Meaning

Shows locations and explains the meaning of various safety instruction stickers on the machine.

CONTROLS

Lever Operations for Movement and Cutting

Explains the function of travel, speed, brake, and blade clutch levers for machine operation.

Throttle, Choke, and Differential Lock

Details the throttle/choke lever and differential locking lever for engine speed and traction control.

FUEL VALVE

Fuel Cock Operation

Describes how to open and close the fuel cock for starting and stopping the engine.

HEIGHT OF CUT CONTROL

Adjusting Cutting Height

Guides on adjusting the cutting height with a safety warning about low positions.

OPERATION

Starting, Mowing, and Stopping Procedures

Comprehensive guide on starting the engine, mowing techniques, and proper stopping and parking.

MAINTENANCE OPERATION TO BE CARRIED OUT BY THE USER

Daily Checks and Refueling Safety

Essential daily maintenance tasks and critical safety precautions during refueling.

Blade Maintenance and Sharpening

Instructions for checking, changing, and sharpening mower blades, including safety advice.

LUBRICATION

Lubrication Points and Types

Specifies where to apply light oil and grease for proper machine lubrication.

AIR FILTER

Air Filter Cleaning and Replacement

Details cleaning and maintenance procedures for foam and paper air filter elements.

ENGINE

Engine Oil Level Check and Type

Explains how to check and replenish engine oil, including the correct type and procedure.

MONTHLY MAINTENANCE

Wire Tension Adjustments

Guides on adjusting transmission, blade, and differential locking wires for optimal function.

BELT MAINTENANCE

Belt and Oil Level Checks

Covers checking belt tension/condition and oil level according to schedule.

MAINTENANCE CHART

Inspection Schedule and Responsibilities

A chart detailing maintenance tasks, frequency, and who is responsible for them.

BREAKDOWNS AND SOLUTIONS

Troubleshooting Common Issues

Lists common problems, their causes, and suggested solutions for machine malfunctions.

TIGHTENING TORQUES

Torque Specifications for Fasteners

Provides a table of tightening torque values (daNm) for various screw sizes.

LIMITED WARRANTY

Warranty Terms and Exclusions

Details the warranty period, conditions, and what is not covered by the warranty.

DAISHIN SRM180K Specifications

General

Brand	DAISHIN
Model	SRM180K
Category	Lawn Mower
Language	English