Need help?Do you have a question about the DAITEM ALARM SYSTEM AND DIALLER and is the answer not in the manual?
Learn to arm/disarm the Daitem system using remote control, keypad, or tags.
Control specific protection groups individually or simultaneously.
Securely change the master code for system configuration and access.
Manage user codes for limited access to system commands.
Test motion detectors and door/window sensors by triggering them.
Conduct a full system test that triggers alarms and notifies correspondents.
Diagnose issues with device radio link faults and their messages.
Understand how the dialler alerts correspondents about events via PSTN, GSM, or ADSL.
Learn to operate the system remotely via phone or Internet.
Securely change the master code for dialler configuration and remote access.
Update telephone numbers for individual correspondents for call notifications.
Understand the dialler's procedure for calling correspondents in sequence.
Learn the procedure for voice calls to individuals and correspondent interactions.
Understand procedure for calls to a remote monitoring centre via PSTN, GSM, Ethernet.
Control the alarm system via telephone (PSTN/GSM), covering command codes and procedures.
Configure and operate the dialler remotely via PC connected to the Internet.
Operate the system remotely by sending SMS messages via the GSM network.
General| Brand | DAITEM |
|---|---|
| Model | ALARM SYSTEM AND DIALLER |
| Category | Security System |
| Language | English |
To Next Page
