Need help?Do you have a question about the DAITEM SH426AX and is the answer not in the manual?
Step-by-step guide on how to open the siren and connect its power.
Details the step-by-step procedure for programming the siren's recognition.
Configures the delay for alarm sounding after an intrusion detection.
Adjusts parameters related to the siren's sound output.
Controls siren activation based on intrusion detection.
Sets the siren's behavior for alarms when in presence mode.
Alerts neighbors to an ongoing intrusion situation.
Defines the type of visual and audible indications for various events.
Sets conditions for the anti-tamper switch to activate the siren.
Recommendations for selecting an optimal location for siren mounting.
Verifies the radio communication link before final installation.
Detailed instructions on how to physically mount the siren.
Tests the siren's tamper detection and alarm response.
Explains how the siren and control panel indicate faults.
Parameter for warning indication types.
Parameter for deterrence indication types.
Parameter for prealarm indication types.
General| Model | SH426AX |
|---|---|
| Manufacturer | DAITEM |
| Operating Temperature | -10°C to +55°C |
| Device Type | Control Panel |
| Keypad Support | Yes |
| Communication | Wireless |
| Power Supply | 230V AC |
To Next Page
