Dale Tiffany 10057-610 User Manual

ASSEMBLY INSTRUCTIONS:
Item No: 10057-610
1. Place the lamp base on a level surface.
2. Screw the socket assembly (A) into the base.
3. Screw the threaded rod (B) into socket assembly (A).
4. Adjust the knurl nut (C) onto the threaded rod
(B).This can be used to raise the shade a little if
necessary.
5. Place shade (D) over threaded rod (B), and
tighten finial (E) securing the shade in place.
6. Insert bulbs into the bulb socket.
Recommended (2) maximum 60 WATT Type “B” Bulbs
or (2) maximum 13WATT CFL Bulbs
(Bulbs not included)
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth.
Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision – 03/06/13
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.

Dale Tiffany 10057-610 Specifications

General

Brand	Dale Tiffany
Model	10057-610
Category	Outdoor Light
Language	English

Summary

Lamp Assembly Instructions

Step 1: Prepare Base

Place the lamp base on a level surface for stable assembly.

Step 2: Install Socket Assembly

Screw the socket assembly (A) into the lamp base.

Step 3: Attach Threaded Rod

Screw the threaded rod (B) into the socket assembly (A).

Step 4: Adjust Shade Height

Adjust the knurl nut (C) on the threaded rod (B) to raise the shade if necessary.

Step 5: Secure Shade

Place shade (D) over threaded rod (B) and tighten finial (E) to secure the shade.

Step 6: Insert Bulbs

Insert the specified bulbs into the bulb socket.

Lamp Care and Maintenance

Cleaning Instructions

Unplug the lamp and wipe with a damp cloth. Do not use abrasives.

Important Safety Instructions