Dale Tiffany 10056/604 User Manual

ASSEMBLY INSTRUCTIONS:
Item No: 10056/604
1. Place the base (A) on a level surface.
2. Insert the harp (C) until it sits firmly into the saddle (B).
3. Adjust the knurl nut (D) on harp (C).
This can be used to raise the shade a little if necessary.
4. Place lower cap (E), shade (F), and upper cap (G) over
the end of the harp (C) and tighten the finial (H) securing
the shade in place.
5. Insert the bulb into the bulb socket.
Recommended (1) maximum 60 WATT Type “B” Bulb
Or (1) maximum 13WATT CFL Bulb
(Bulb not included)
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth.
Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision -10/16/12
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.

Dale Tiffany 10056/604 Specifications

General

Brand	Dale Tiffany
Model	10056/604
Category	Outdoor Light
Language	English

Summary

Assembly Instructions

Step 1: Place the base

Place the base of the lamp on a level surface to begin assembly.

Step 2: Insert the harp

Insert the harp into the saddle until it is firmly seated.

Step 3: Adjust the knurl nut

Adjust the knurl nut on the harp to raise or lower the lampshade if needed.

Step 4: Secure the shade

Place the lower cap, shade, and upper cap over the harp and tighten the finial to secure.

Step 5: Insert the bulb

Insert the recommended light bulb into the bulb socket.

Recommended Bulb Type

Use one maximum 60 Watt Type 'B' bulb or one maximum 13 Watt CFL bulb (bulb not included).

Lamp Cleaning Instructions

Unplug the lamp before cleaning. Wipe with a damp cloth and avoid using abrasives.

Important Safety Instructions

Details on polarized plug safety features and proper electrical connections.