Dale Tiffany TA80540 - User Manual

ASSEMBLY INSTRUCTIONS:
Item No: TA80540
1. Place the base on a level surface.
2. Insert the harp (B) until it sits firmly into the base cup (A).
3. Adjust the knurl nut (C) on harp (B).
This can be used to raise the shade a little if necessary.
4. Place the shade (D) over the end of the harp (B).
5. Place shade cap (E) over shade and tighten the finial (F)
securing the shade in place.
6. Insert the bulb into the bulb socket.
Recommended (1) maximum 60 WATT Type “A” Bulb
Or (1) maximum 13WATT CFL Bulb
(Bulb not included)
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth.
Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision – 08/06/12
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.

Summary

Assembly Instructions

Lamp Assembly Steps

Follow sequential steps to assemble the lamp, including base, harp, shade, and bulb.

Recommended Bulb Type

Use a maximum 60W Type "A" or 13W CFL bulb. Bulb is not included.

Lamp Care and Safety

Cleaning Instructions

Unplug the lamp and wipe with a damp cloth. Do not use abrasives.

Important Safety Instructions: Polarized Plug

The polarized plug is a safety feature; if it doesn't fit, contact a qualified electrician.

Dale Tiffany TA80540 Specifications