Dale Tiffany TA100122 User Manual

ASSEMBLY INSTRUCTIONS:
Item No: TA100122
1. Place the base on a level surface.
2. Insert the harp (B) until it sits firmly into the saddle (A).
3. Adjust the knurl nut (C) on harp (B).
This can be used to raise the shade a little if necessary.
4. Place the shade (D) over the end of the harp (B) and
tighten the finial (E) securing the shade in place.
5. Insert the bulb into the bulb socket.
Recommended (1) maximum 25 WATT Type “B” Bulb
Or (1) maximum 13WATT CFL Bulb
(Bulb not included)
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth.
Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision – 06/28/12
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL
PACKAGING TO MINIMIZE DAMAGE.

Dale Tiffany TA100122 Specifications

General

Brand	Dale Tiffany
Model	TA100122
Category	Outdoor Light
Finish	Antique Bronze
Bulb Type	Incandescent
Number of Bulbs	1
Bulb Included	No
Voltage	120
Weight	3.5 lbs
Type	Wall Light
Glass	Art Glass
Wattage	60W
Material	Metal, Glass

Summary

Lamp Assembly Instructions

Place Lamp Base

Position the lamp base on a flat, stable surface before proceeding with assembly.

Install Lamp Harp

Insert the lamp harp (B) into the saddle (A) on the base, ensuring a secure fit.

Adjust Harp Nut

Tighten or loosen the knurl nut (C) on the harp (B) to adjust the shade height if needed.

Attach Lamp Shade

Place the shade (D) onto the harp (B) and secure it by tightening the finial (E).

Install Light Bulb

Screw the recommended light bulb into the socket located within the lamp assembly.

Lamp Usage and Safety Information

Recommended Bulb Specification

Specifies the maximum wattage and type of bulb (Type 'B' or CFL) suitable for the lamp.

Lamp Cleaning Guide

Instructions for cleaning the lamp, advising to use a damp cloth and avoid abrasives.

Critical Safety Precautions

Details polarized plug safety, proper outlet use, and warnings against extension cords.