What to do if my DALEMANS Gas Detector shows a non-zero reading when there's no gas?
If your DALEMANS Gas Detector displays a non-zero reading when no gas is present, it could be due to wear of the measuring sensor or a calibration fault. You should calibrate the detector according to the procedure outlined in the manual.
What to do if my DALEMANS Gas Detector shows a zero reading when gas is present?
If your DALEMANS Gas Detector shows a zero reading when gas is present, there are several potential causes. First, check the detector wiring and the connection of the sensing head, as it could be a wiring fault. Another possibility is that the sintered metal filter is either dirty or blocked, in which case you should clean or replace the filter. Finally, the sintered metal filter could be contaminated, requiring you to replace the filter, replace the measuring sensor, and then calibrate the detector.
General| Brand | DALEMANS |
|---|---|
| Model | DAT 420 |
| Category | Gas Detectors |
| Language | English |
To Next Page
