7
PARAMETERS
CODE DESCRIPTION SET VALUE
PRESSURE CONTROL 0
* ( 0 = TRANSDUCER, 1 = PRESURE SWITCH )
TOP RANGE PRESSURE TRANSDUCER 15 Bar
HIGH PRESSURE ALARM 8,8 – 11 – 14,3 Bar
STOP PRESSURE 7,5 – 10 – 13 Bar
START PRESSURE 6,5 – 9 – 12 Bar
OFFSET PRESSURE TRANSDUCER 0
MAX. TEMPERATURE SET 110 °C
HIGH TEMPERATURE ALARM SET 105 °C
FOREWARNING HIGH TEMPERATURE SET 100 °C
LOW TEMPERATURE SET 0 °C
TEMPERATURE SENSOR OFFSET 0 °C
STAR TIMER 5 sec.
STAR/DELTA SWITCHING TIMER 50 msec.
LOAD DELAY TIMER 2 sec.
UNLOAD STOP TIMER 2 min.
UNLOAD STOP TIMER VARIABLE 0
STOP TIMER 30 sec.
AIR FILTER CHANGE TIME 2000 Hours
OIL FILTER CHANGE TIME 2000 Hours
SEPARATOR CHANGE TIME 4000 Hours
OIL CHANGE TIME 2000 Hours
CHECK KOMPRESOR 2000 Hours
STARTS/ HOURS ALLOWED TO THE MOTOR 6
LOW VOLTAGE ALARM 1
RL5 SET 0
FAN ON (RL5) 85 °C
DELTA T FAN OFF (RL5) 10 °C
ATTENTION : P18- P22 COUNTDOWN IDENTIFY THE MOTOR RUNNING TIME, WHEN THE COUNTDOWN IS ELAPSED THE TIMER
WILL GO ON AS NEGATIVE COUNTING.
To Next Page
Loading...