Dali EPIKORE 3 - Page 4

C
B
B
A
C
C
A
B
B
5
6 7
Place a spike outrigger
A
in position on the boom panel of the EPIKORE and use its aachment screws
B
and the 5mm Allen key
C
to secure it in position. Tighten the screws fully.
Repeat for all four spike outriggers.
Apply the two magnetic spike feet
A
to the spike outriggers
B
positioned at the top-facing side of the loudspeaker.
Apply two floor protection pads to
the spike feet closest to the floor
C
.
Remove the EPIKORE cabinet protection cloth and
carefully raise the loudspeaker to its upright position
at its operational position.
4
5mm
Do not overtighten.
Do not touch the drivers.
Minimum 2 persons.
7DALI EPIKORE ManualDALI EPIKORE Manual6