Dali Kubik - Playback; Bluetooth Connectivity

15
BLUETOOTH SETUp
Action
Status
1 Select Bluetooth on the KUBIK FREE.
The light next to the symbol will start flashing,
indicating the KUBIK FREE is ready for pairing.
2 Enable Bluetooth on phone, tablet or PC.
3 On the phone, tablet or PC, scan for Bluetooth
devices.
DALI KUBIK FREE will show up on the list of
Bluetooth devices.
4 Select 'DALI KUBIK FREE' and finalize the
pairing process.
If asked to input a code use four zeros (0000).
5 KUBIK FREE is now connected to your phone,
tablet or PC.
KUBIK FREE is now connected and will play
music and video audio.
When turned on in Bluetooth mode, or switched to Bluetooth mode via the input selector or remote control,
the KUBIK FREE will automatically try to reconnect to the last used phone, tablet or PC.
As long as a phone, tablet or PC is connected to the KUBIK FREE no other phone, tablet or PC can connect.
Release Bluetooth connection on phone, tablet or PC to activate pairing process for new phone, tablet or PC.
KUBIK FREE will not function as a hands free speaker for your phone or PC.
Note: To achieve the best audio quality set the volume on your phone, tablet or PC to maximum and use the
volume control on the KUBIK FREE.
pLAyBACK