Dali Kubik - Appendix; IR Remote Learning

16
Ir LEArNINg
The IR learning function lets you use an existing remote control to operate the KUBIK FREE. This means
that you can use your TV remote control, or any other remote control to adjust the volume and activate any
input on the KUBIK FREE. To achieve this you must first enable the KUBIK FREE to accept the IR signals from
the remote you wish to use. Follow the simple steps below to activate IR learning for your remote control.
Place yourself in close proximity to the front of the KUBIK FREE. Have both your primary remote control and
the KUBIK FREE remote control ready at hand, and the KUBIK FRE turned on.
NOTE - The KUBIK FREE will automatically exit IR learning mode if no user activity is detected for 30 seconds.
NOTE: KUBIK FREE’s IR learning feature cannot be used with Bang & Olufsen remote controls.
AppENDIx