Need help?Do you have a question about the damian LUCE X SNAC and is the answer not in the manual?
General| Model | LUCE X SNAC |
|---|---|
| Category | Vending Machines |
| Manufacturer | Damian |
| Type | Snack vending machine |
| Power Supply | 230 V / 50 Hz |
| Dimensions | 1830 x 889 x 793 mm |
Explains the components and references shown in the circuit board diagram.
Troubleshooting guide for error messages displayed on the vending machine.
Troubleshooting for errors related to FTCA vending sensors.
Troubleshooting for errors related to the product removal door.
Troubleshooting for errors related to the sliding anti-theft panel.
Troubleshooting for errors related to the CPU circuit board.
Troubleshooting for errors related to the CLP1 POT circuit board.
Troubleshooting for keyboard sensor and general unforeseen errors.
Troubleshooting messages and solutions for motor anomalies.
Guidance on specific motor anomaly messages and operational issues.
Procedure to check the correct operation of the door safety switch.
Procedure for checking and lubricating the sliding panel.
Procedure to check and clean the FTCA vending sensors.
Procedure to check product door microswitches and magnets.
Procedure to check and clean the refrigeration unit condenser.
Instructions on how to access the programming mode.
Guide to selecting parameters within the programming menu.
Steps for modifying the value of a selected programming parameter.
Instructions for exiting the programming mode.
Setting the display language for messages.
Configuring the vending machine's operational mode.
Procedure to set the current date and time.
Activating or deactivating the display of the current time.
Setting parameters for energy saving functions.
Setting the delay for Save Mode activation.
Setting the LED light intensity for Save Mode.
Setting the start and end times for Night Mode.
Setting the LED light intensity for Night Mode.
Setting the internal temperature during Night Mode.
Visualizing and setting the refrigerator operating mode.
Configuration for FTCA product detection sensors.
Activating the FTCA product detection sensors.
Allowing additional selections after a missed sale.
Setting the position of the decimal point for prices.
Allows reading the internal parameter software 'code mode'.
Displaying the installed software versions.
Procedure to reinitialize the vending machine's CPU card.
Setting the primary selling prices for products.
Activating management of the secondary price bracket.
Setting the secondary selling prices for products.
Associating selling prices with product selections.
Enabling the display of product selling prices to customers.
Setting the base coin value for price calculations.
Setting the maximum credit value accepted by the system.
Setting operating parameters for the coin return system.
Setting minimum coin threshold for 'no change' indication.
Setting minimum coin threshold for providing change.
Enabling compulsory sale to prevent use as a coin changer.
Enabling manual emptying of coin tubes.
Selecting the sales mode for MDB payment systems.
Setting parameters for coins managed by the coin return system.
Reading and enabling/disabling coins in coin return tubes.
Reading and managing tokens in MDB payment system tubes.
Reading and recognizing banknotes and tokens.
Reading and enabling/disabling banknotes.
Enabling token recognition by an MDB banknote reader.
Associating price bracket A or B with Cashless system N.1.
Associating price bracket A or B with Cashless system N.2.
Selecting the price bracket for RFID payment system.
Setting correct machine codes for RFID system operation.
Reading the internal temperature of the vending machine.
Setting the internal temperature of the vending machine.
Setting internal temperature during Night Mode.
Reading the working temperature of the refrigeration unit.
Setting the safety temperature for food product sales.
Setting the time limit for exceeding safety temperature.
Time added to overtemperature time after restocking.
Reading the number of connected refrigeration unit control probes.
Resetting security and passcode codes for EVA-DTS.
Reading total vending machine sales count since last reset.
Reading total value collected since last reset.
Total sales count for each vending machine selection.
Total sales count for each product price line.
Reading the general total number of vending machine sales.
Reading the general total amount collected.
Resetting partial totals counted by the vending machine.
Identifying motors that have generated an Out of Order condition.
Procedure for testing individual motors through a sales cycle.
Function to perform a quick check of motor conditions.
Procedure to repeat the self-learning of vending machine motors.
Test for the sliding anti-theft panel operation.
Test for the 'Push' product removal door operation.
Test for the FTCA vending sensor circuit.
To Next Page
